Gasket 50.5/23.0 mm

07-0506-01· Seal for motor holder on CSTR

Gasket used for the motor holder in the following reactors: CSTR 5G (ART NO 06-0000-01) CSTR 5S (ART...

11,00 €

Quantity
In stock: Delivery time: 1-2 weeks
Product information

Gasket used for the motor holder in the following reactors:

  • CSTR 5G (ART NO 06-0000-01)
  • CSTR 5S (ART NO 07-0000-01)
  • CSTR 10S (ART NO 08-0000-01)

Also used with the Brushless DC motor kit for CSTR-5/10 (ART NO 06-0201-01)

 

Extraction tested by an independent laboratory in accordance with FDA CFR:177.2600, 3-A 18-03 Sanitary Standards Class II and for biological response according to USP Class IV. Also complies with the requirements of NSF.

Specifications
Accessory for
Art no.
Technical specifications
Material type: Peroxide cured Ethylene propylene terpolymer (EPDM)a
Color: black
Temperature range: -40 °C to +140 °C
Storage recommendation: According to ISO 2230

ASTM D2000 M7CA 810 A25 B35 F17
FDA CFR 177.2600
USP 42 Cytotoxicity testing 87
USP 30 Class VI-121 C 88
USP 35 Physicochemical Testing 381
ADIF (Animal Dervided Ingredient Free) BSE/TSE
EC1935/2004 for water and acid only

Hardness (Shore A) (ASTM D2240): 74
Tensile Strength (MPa) (ASTM D412-06): 10.70
Elongation (%) (ASTM D412-06): 187
Compression set, 22 Hrs at 150 C (ASTM D395/B) 8.5%
Specific gravity (g/cm3): 1.156

SIP: Good short exposure
CIP: Good
Oils and Vet: Poor
WFI: good
Sterilisation: Excellent
Steam sterilisation: good